Answers From Experts: Q&A With Log Cabin Maintenance Expert
Earlier in the month we announced our “Answers from the Experts” series. In part two of the series we have interviewed John Schroeder from log help, a log cabin expert, on some of your most popular questions on maintaining, protecting and looking after your log cabin home.
For those of you who own a log home, this post will help you with key maintenance elements of maintaining/restoring caulking, staining your cabin, and protecting against mildew, mold, termites, and rot.
A full transcript of our interview with John can be seen below:
Why should a log cabin owner be interested in or care about regularly maintaining their log cabin home?
Just like a periodic car wash, tune-up, oil change, and tire rotation keep a car looking better and running longer, so an annual inspection and as-needed maintenance will keep a log home looking good with integrity and value.
What’s the first thing a log cabin owner should be aware of when it comes to maintaining their cabin?
As Benjamin Franklin wisely said, ‘An ounce of prevention is worth a pound of cure.’ Simple steps like washing your home, giving it a yearly inspection, and preventing issues before they happen will save major headaches in the long run. An example is water-based stains with a top clear coat: It’s an easy process of washing and reapplying the clear coat when and where needed. If left too long before maintaining, however, there could be weathering, peeling, or other issues that might require more extensive and expensive surface restoration.
What’s the best option to protect a log cabin from mildew, mold, termites, and rot?
Keeping moisture out of the wood will prevent most issues. Borate preservatives can be applied to bare wood before staining to prevent rot and insect infestation. Mildewcides can be applied to the stain/sealer to prevent mildew and mold in areas of high humidity. Promoting airflow by keeping shrubs away from the house can also deter mildew and mold.
What’s the best type of finish or stain (e.g. oil-based, latex-based, varnish) to use on a log cabin, and how does it help towards cabin maintenance?
The ‘best’ stain may vary by the home, personal preference, and situation. There are pros and cons to water vs oil, penetrating vs surface, etc. A knowledgeable log home stain dealer should be contacted for guidance on which product is right for the home and how to best prepare for its application.
What’s a good technique for restoring and maintaining log cabin caulk?
Proper caulking repair will depend on the material that is used and the state of its disrepair. If applied correctly, modern, synthetic caulk typically only needs to be applied once. If the old or new caulk is failing, the best option is to remove it and start fresh with a backer rod and synthetic log sealant. Full replacement isn’t always an option, however, and so often a good way to repair old caulk is to put a strip of clear packaging tape over the old, damaged caulk and apply a new layer of synthetic material over top. Other situations may call for different repairs, so when in doubt contact a knowledgeable log home caulking dealer or restoration contractor.
What are your best quick tips for ensuring that a log cabin stays in good condition over its lifetime?
The simple answer is this: Keep the water off the logs. During the design/building stage, that means keeping the first course of logs two or more feet above grade level, building long overhangs, and directing water away from the building. After construction, that means installing or repairing gutters, maintaining a water-repellent log stain/sealer, and caulking checks and cracks that may collect water, etc. Keep moisture out of the wood and it will last indefinitely!
We really enjoyed our interview with John and we hope you did too. If you have any additional questions on log cabin maintenance then please post a comment below and we will be sure to answer!